White Cat lighting board

White Cat Lighting Board Documentation

Outils pour utilisateurs

Outils du site


configuration_generale_eng

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Both sides previous revision Révision précédente
configuration_generale_eng [2014/11/29 23:16]
174.61.171.90
configuration_generale_eng [2015/08/11 21:54] (Version actuelle)
73.53.29.116 [Channels Go and Pause]
Ligne 76: Ligne 76:
 The Channel Go and Pause Channel are channels that will serve as ** indicator lights (mimic Lights) on the state of CueList **, allowing the interpreter to ensure that the triggering of the CueList is not paused. ​ By launching the Go, the system will flash defined as the crossfade is ongoing and not paused. The Channel Go and Pause Channel are channels that will serve as ** indicator lights (mimic Lights) on the state of CueList **, allowing the interpreter to ensure that the triggering of the CueList is not paused. ​ By launching the Go, the system will flash defined as the crossfade is ongoing and not paused.
 If the CueList is paused, the channel defined as Pause Channel will flash. If the CueList is paused, the channel defined as Pause Channel will flash.
 +
 +Usually a small colored bulb somewhere will work very well 
  
 This flash is executed in the display and output dmx, it bypasses the grand master and freeze. This flash is executed in the display and output dmx, it bypasses the grand master and freeze.
configuration_generale_eng.txt · Dernière modification: 2015/08/11 21:54 par 73.53.29.116