White Cat lighting board

White Cat Lighting Board Documentation

Outils pour utilisateurs

Outils du site


fxmodes_eng

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Both sides previous revision Révision précédente
fxmodes_eng [2014/11/22 00:57]
174.61.171.90 [Buffer Faders, in]
fxmodes_eng [2014/11/22 01:00] (Version actuelle)
174.61.171.90 [Using FX modes]
Ligne 56: Ligne 56:
  
 | Mode | Color | Calculation | | Mode | Color | Calculation |
- | Orange | Normal mode, Highest level. Ex. F1 puts chan 4/60 and F2 puts 4/20 so output is 4/60 assuming both faders are run up all the way|+HTP | Orange | Normal mode, Highest level. Ex. F1 puts chan 4/60 and F2 puts 4/20 so output is 4/60 assuming both faders are run up all the way|
 | Off | Black | Output is not stored in the General Buffer of Faders, but will be used for the Faders groups (see below) Ex. F1 puts 4/60 and F2 (4/20 but set to off) has no effect. ​ Output remains 60.| | Off | Black | Output is not stored in the General Buffer of Faders, but will be used for the Faders groups (see below) Ex. F1 puts 4/60 and F2 (4/20 but set to off) has no effect. ​ Output remains 60.|
 | Subtract | Red | Output is subtracted from the General Buffer of Faders. ​ With F1 putting 4/60, then F2 (4/20 set to subtract) will make the output 40 when F2 is run up all the way| | Subtract | Red | Output is subtracted from the General Buffer of Faders. ​ With F1 putting 4/60, then F2 (4/20 set to subtract) will make the output 40 when F2 is run up all the way|
fxmodes_eng.txt · Dernière modification: 2014/11/22 01:00 par 174.61.171.90